ESK03
5
SKATEBOARD & CONTROLLER PAIRING
CHARGER
PRODUCT OVERVIEW
1
4
6
2
5
3
9
10
11
12
14
17
13
15
16
7
8
#
ACCESSORY/PART
#
ACCESSORY/PART
1
Front Truck
10
Speed Mode (Hi/Med/Low)
2
LED light
11
Directional Mode (Forward/Back)
3
Battery Housing
12
Power Button
4
USB Hub
13
Signal Indicator
5
Battery Indicator Button
14
Skateboard Battery Indicator
6
Charging Port
15
Remote Battery Indicator
7
Power Button
16
Pair Button
8
Hub Motor
17
Charging Port
9
Speed Control
Before riding the Skateboard and Remote must be paired together. Ensure both
Skateboard and Remote are turned off. Then follow the pairing procedure below.
Red Light:
Skateboard is charging
Green Light:
Skateboard is fully charged.
1. Turn on the board
2.
Press the power button for 5 seconds, then the power button light will flash.
3.
Turn on the remote, then press the pair button. The signal indicator will flash
and the power button light will flash with same frequence. Then means the two
products are paired successfully.
4. Roll the speed control forward to test the accelaration and backward to test the
brake. After tested all function work normal you can start your riding.
1
3
