3
Programming timeline modes (time-programmed sequence of pictures).
You can set duration for each uploaded picture and thus create a sequence of them, synchronized
with the music. There are 10 timeline sequences T1-T10.
To configure the timeline:
1.
Start Ignis Pixel Utility
2.
Open single pictures from files through menu Add –> Image or drag and drop files to Image list
in the left coloumn of Ignis Pixel Utility.
3.
Select images in Image list, drag and drop them to timeline (T1-T10) at the bottom of Ignis
Pixel Utility.
4.
Now you see sequence of pictures. You can change their order and duration by dragging them
or their borders, like in video editors. Use Ctrl (Cmd for MacOS) button to change editing
method Ripple edit/Rolling edit.
5.
To adjust timeline synchronous with music add your music file through menu Add –> Music or
drag and drop MP3 file to timeline Music.
6.
Connect your digital poi to your computer with Micro-USB cables and press Scan button at the
bottom of Device list.
7.
Click "Upload all" button – the process can take up to several minutes depending on the poi
model and height-width ratios of the pictures.
8.
When you change only duration or order of pictures in timeline to save time just select
timeline and click orange button "Upload Checked" – process will only take 1-2 seconds.
Saving your project
The software allows you to save the project, and you can, for example, send your project by e-mail or
USB flash to another computer. You do not need to send the original pictures of your project. They
are contained within the project file.
