C o r r e c t u s e
14
MRBP.424321.001UM Version 1.0 27/01/2020
3)
press the device with a slight force towards the DIN-rail until the latch locks (see fig.
6).
Figure 6
–
EMI-SSD-1M mounting on DIN rail
Mount the wires in accordance with one of the connection diagrams given in Appendix B to
the mating parts of the terminal blocks included in the delivery set and connect them to the EMI SSD-
1M.
Notice:
Installation of external connections is carried out with a wire with a cross-
section of not more than 2.5 mm
2
. For stranded wires, use cable lugs.
3.3.3
Demounting
Disconnect mating parts of the terminal blocks.
Dismount EMI-SSD-1M according to fig. 7 as follow:
1)
with a little effort, lift the device in the vertical direction until it stops, grasping its
lower part;
2)
pull EMI SSD-1M by the upper part of the body in the direction from the DIN rail;
3)
take EMI SSD-1M away from the DIN rail.