5
SAFETY
The device is safe to use as intended. The construction and design of the device comply with
all safety regulations. Prior to starting work, any person involved must read and understand the
operating instructions. This also applies if the person concerned has already worked on such or
similar equipment or has been trained by the manufacturer. Any person carrying out installation work
must meet the health and safety requirements that apply everywhere. This is especially true when
using personal protective equipment.
DANGER!
Danger of fatal injuries due to electric shock!
The electrical connection may only be installed by a qualified electrician.
Prior to opening the device, disconnect the system from the power supply and prevent it from
being switched on again!
WARNING!
Work on the device and its components may only be carried out by qualified specialists
(heating, refrigeration, coolant technicians and electricians).
WARNING!
Observe the safety signs on and inside the device.
WARNING!
The unit contains coolant!
If the coolant leaks, it poses risk to people and the environment, therefore, you must:
–
turn off the system;
–
make sure the installation room is well ventilated;
–
inform the manufacturer’s customer service.
ATTENTION
For safety reasons, never disconnect the device from the power supply unless the device is open.
Do not use pure water in the outdoor circuit.
PRODUCT PACKAGING AND TRANSPORTATION
After purchasing a heat pump:
Inspect the delivered product for external damage during delivery;
In the event of delivery defects, submit a claim to the company that sold the device immediately.
The heat pump may only be transported and stored in an upright position.
The device
can only be temporarily tilted, not laid down. The device can be stored at a temperature no lower
than 10
o
C.
