Igloo JOLA 4 Series, User Manual

Page: 14 / 40

en
14
User manual JOLA 4 www.igloo.pl
1
2
3
4
1 – Glass shelf
2 – Shelf fi xing grip
3 – Perforated frame strip
4 – Bumpon – silicone element protecting
the glass shelf against moving (it has
to be essentially glued to the shelf
fi xing grip!!!)
1 – Thermostat panel (temperature regulator) (details of service in
Chapter No. 7 on p.19 or 20)
2 – Main switch (turns on/ off the aggregate of the device)
3 _ Switch of the internal illumination
4 – Switch of the frame rotation
Fig.3 Fixing the door grip
Fig.4 Mounting glass shelves
Fig.5 Control panel
1
2 3 4
The rotating frame is activated with the help of switch placed on case
control panel.
Each opening of case doors stops the rotation of the
frame for the time when doors are open. Closing the door will once
again activate the movement of rotating frame.
4. EXPLOITATION
Temperature of cooled space and operating cycle of the aggregate may vary. They depend on numerous factors,
such as amount and temperature of products placed in the device and the ambient temperature. It is recommended
to avoid unnecessary opening of the doors.
The device should be placed in a dry place, not insolated and well ventilated, ensuring proper air circulation (min.
100 mm distance between the wall and the device), far from sources of heat and devices forcing the air circulation
(roof ad mobile ventilators, blowing heaters). The device operates properly in an environment, where temperature
falls within proper climate class stated on the data plate. The operation of the device may worsen, when it will operate
in temperature higher or lower than the one determined in the stated temperature range.
DO NOT BLOCK VENTILATION HOLES!!! Minimal distance between ventilation holes of the device and
other elements of the equipment (furniture) or walls should equal at least about 10 cm.