REFRIGERATION LTD
Heated Display Cases
| www.igloorefrigeration.com
5
3.1. Installation requirements
Always use a dedicated circuit with the amperage stated on the unit.
Do not overload the circuit.
Do not use extension cords.
Never use adapters.
Never plug in more than one unit per electric circuit.
If in doubt, call an electrician.
IGLOO will not warranty any equipment that is connected to an extension cord or
adapter plug.
The equipment may be turned on after confirmation of the fire protection efficiency
with results of measures performed according to binding regulations!
3.2. Unit location
Install the unit an even and hard base. Then level the unit with the levelling legs.
To ensure proper operation the unit must be leveled from front to back and left to right with the leveling
legs.
Unit may malfunction if improperly leveled.
Be sure there is sufficient ventilation around the entire unit
Select a location a way from heat and moisture generating equipment.
Avoid installation in a high ambient or humid location.
Humidity may cause rust, condensation around the glass or stainless and decrease the efficiency of the unit.
3.3. Connection and start-up
Remove the protection foil from the elements of the unit (e.g. from the inside of the unit and working top)
The first cleaning of the equipment should be done right after unpacking, and before turning the unit on.
The unit should be cleaned with warm water at a temperature not exceeding 40°C with a neutral detergent.
For washing and cleaning the equipment it is prohibited to use products containing chlorine and sodium
varieties, which destroy the protective layer and components of the equipment! Any residue of adhesives
or silicone on metal elements should be removed only with extraction naphtha (not applicable to items
made of plastic!). Do not use other organic solvents.
When cleaning the unit, do not use water jet. The unit should be cleaned with a
moist cloth
•
Check whether all internal elements of the display cases are properly assembled (screen of heaters;
Gastronomic containers; divider of containers and perforated shelf)
•
Place the plug of the connecting cable directly in plug-in socket (it is forbidden to connect the device by
means of extension cords or dividers!)
■
NEMA Plugs
IGLOO refrigeration uses this type of plug. If you do not
have the right outlet have a certified electrician install
the correct power source.
115/60/1
NEMA-5-15R
