Iget SECURITY M4, User Manual, Page: 6 / 108

4
CZ
SK
EN
PL
HU
System Status & User Authorities
• The M4 system does not support any wired sensors. The main box communicates with all sensors via wireless RF signal protocols.
• Most of the sensors have low battery warning mechanism. Users would receive notifications before the battery runs out.
• The system can change its security status according to the commands given by users or the signals sent from the triggered sensors.
- ARM:
All working sensors can be
triggered. The system will
gen- erate an alarm when
receiving the trigger signal
sent from sensors.
- DISARM:
This mode will de-activate
all sensors. This mode
will also turn off the siren
and stop the alarm process.
- HOME ARM:
This mode will allow some
selected sensors to keep
working while others are deac-
tivated. These sensors could
be selectedinApp.
- SOS:
This mode will trigger builtin
siren and send alarm messages
to emergency contacts. It also
triggers external sirens or other
sensors like smart.
- Life-related sensors like Smoke Detector or CO/GAS sensor will keep working all the time.
• There are three levels of user authorities.
- ADMINISTRATOR:
Who can fully control the system
and invite other users with
assigned levels.
- USER:
Who can operate
ARM/DISARM/HOME ARM/SOS
and control the smart plugs and
cameras, also can invite other
people as USER or GUEST.
- GUEST:
Who can only operate
ARM / DISARM / HOME ARM / SOS.