EN
16
Charging:
During the first three cycles charge the battery only, when it is completely discharged and recharge it at least 6 hours until
it is fully charged.
The device contains a built-in lithium battery, which is designed for repeated recharging. Recharging for the first time,
apply one of the following procedure:
1.
Connect the camera via USB cable to the PC.
2.
Connect the camera to the AC adapter using the USB cable and plug it into the wall outlet (adapter is not
packed).
Warning:
1.
If the battery runs down to a minimum, the camera turns off automatically. To be further used it is necessary to
recharge the battery.
2.
The red light indicator (when the camera is turned on the red LED comes on together with blue one) indicates
that the battery is being recharged. When the battery is fully recharged, the red light goes out.
Camera ON / OFF / Video recording
1.
Pressing
for 3 seconds, you will turn on the camera. After turning on the camera the indicator light, will lights up in
blue colour.
2.
After turning on the camera automatically sets the video mode. Press
OK
button to start recording immediately. To
stop the recording, click
OK
again, the record is automatically saved on the memory card.
3.
If you want the device off, press
on/off button.
Menu Settings
Video settings/System settings
Turn the device on by pressing
ON/OFF
button
.
The camera will automatically switch over to the
Video recording
mode. Press MENU button to access the Settings menu. If you press twice the MENU button twice, you will get into
the
System settings.
To navigate in the menu, use the arrow keys
UP
and
DOWN
. To confirm each selection, press
OK
. To stop editing and return to
the main screen, press
MENU button
.
Setting of video recording mode
1.
Resolution:
Set the required video resolution.
2.
Recording in a loop:
Set the desired loop length or you can turn off the recording in a loop.
3.
WDR:
ON/OFF
.
4.
Exposure:
Set the required exposure.
5.
Motion detection:
ON/OFF.
6.
Audio record:
Sound recording ON/OFF
7.
G-SENSOR:
Set the G sensor sensitivity.
8.
Date display:
ON/OFF.
System settings
1.
Date/time:
Set the actual date and time.
2.
Automatic shutdown:
Set the time after which the camera switches down automatically.
3.
Key sound:
ON/OFF.
4.
Language:
Choose the required language.
5.
TV mode:
PAL/NTSC.
6.
Frequency:
50Hz / 60Hz.
7.
Screen saver:
Set the time after which the display starts saving.
8.
IR LED (additional lighting):
ON/OFF.
9.
Format:
Cancel / OK - delete all from memory card.
10.
Initial setting:
Cancel / OK resets your camera to factory settings.
11.
Vehicle registration number:
Set the name of your vehicle.
12.
SW version:
You will find the software version of your camera
Functions
Recording in a loop
After setting the determined time of loop, the entries with a selected length (1 min. / 3 min. / 5 min.) are recorded after pressing
OK
button. If there is no free space on a memory card, the oldest records will be automatically overwritten and the camera
keeps on recording.
