FAQ
Specifications
14
15
Q: The device cannot be previewed properly?
A: Check whether the network is normal, you can place the camera close to the router, and if not, it is recommended to reset the
device and add it again.
Q: Why is it still in the list of devices after reseting?
A: The reset device only resets the network configuration of the camera, but cannot change the configuration on the App, remove
the camera, and must be deleted by the App.
Q: How to cut the camera network to another router?
A: First remove and reset the device on the App and then configure the device again by the App.
Q: Why doesn't the device identify the SD card?
A: It is recommended to plug in SD card after power cut. Confirm whether the SD card is normally available and the format is
FAT32. And the TF card can’t be identified when the internet environment is not good.
Q: Why I can’t get the notifications with my cell phone App?
A: Please confirm that the App has been running on the phone, and the relevant reminder function has been opened; Message
notification and authority confirmation in the mobile phone system have been opened.
Camera
Resolution
Video
Audio
Image Sensor
PIR Detection Rangle & Angle
Floodlight
Motion Detection
Night Vision
Storage
Power Supply
Wireless
Security Protocols
Dimensions / Weight
Ingress protection
Operating temperature
1080p Full HD Video Recording, 135° Wide Angle Lens
1920 × 1080
H.264, 1920 × 1080@15fps
Built-in Microphone & Speaker
1/2.9” 2 Megapixel CMOS Sensor, f=2.8mm, F=2.0
Range: 12m (.Max), Angle: 120°
12.5 W x 2, 6000K, 2100 lm max (adjustable)
PIR motion sensor, Human detection
Up to 33ft/10m
Built-in microSD Socket (max 128 GB), Cloud Storage
AC 100~240V, <32W
2.4G WIFI (IEEE802.11b/g/n)
64/128-bit WEP, WPA/WPA2, WPA-PSK/WPA2-PSK
260mm × 140mm × 132mm / 640g
IP65
−20 °C to 50 °C
Item
Description