![background image](http://html1.mh-extra.com/html/igenix/ig9851/ig9851_user-manual_3939780010.webp)
10
Functions
AUTO: Use this mode for automatic dehumidification. In this mode, the desired
humidity cannot be adjusted, however the fan speed can be changed at any time
by pressing the Turbo button.
MANUAL: Use this mode to manually select the desired humidity level
(between RH35% and RH85%) and Fan Speed (Normal/Turbo)
• Press the Stand-By button to switch the appliance to ‘On’.
• Set the desired humidity using the Humidity/Hours buttons on the control
panel.
• Press the Manual button to begin dehumidification.
• The fan speed can be changed at any time by pressing the Turbo button.
Note: It is not possible to change the desired humidity after the Manual button
has been pressed and dehumidification has commenced, unless the current
dehumidification program has been cancelled.
• Press the Manual button to cancel the program.
• Select desired humidity using the Humidity/Hours buttons on the control
panel.
• Press the Manual button to begin dehumidification.
TURBO: Press this button to alternate between the appliance’s two fan speeds.
When the light above the button is illuminated, the fan will run at a high speed to
ensure maximum moisture removal. When the light above the button is off, the
fan will run at a normal speed and the operation of the appliance will be quieter.
TIMER: The 24 Hour programmable timer can be used to switch on the
unit after a desired period of time; or can be used to switch off the unit after a
desired period of time.
Note: The timer can be selected between 1 to 24 hours, in increments of 0.5
hours between 0 to 9.5 hours, and in increments of 1 hour between 10 to 24
hours.
How to use the Timer to switch on the appliance:
• Plug the appliance into a suitable wall socket – the appliance will beep once
and will remain in Standby Mode.
• Press the Stand-By button to switch on the appliance.
• The illuminating LED will automatically display the Relative Humidity of the
room; you can now select the desired function.
• Once function is selected, press the Stand-By button to switch the appliance