8
• Once function is selected, press the Timer Button to select the desired amount of time you would
like the appliance to switch off in (the LED display will show the hours, continue to press the button
until correct number of hours reached)
• The LED display panel will flash 4 times and then the control panel will switch back to display the
Relative humidity, the timer indicator will illuminate.
• The appliance will switch off after selected period and remain in standby mode.
Child Lock:
Press Child Lock button for 3 seconds to activate. To deactivate, press Child Lock button again for 3
seconds. Whilst Child lock is activated, functions cannot be selected as the buttons are locked.
Sleep Mode:
The Sleep Mode allows you to turn off the bright LED display panel. Press the Sleep button once to
activate Sleep Mode, the button will illuminate and the unit will continue to operate, but the remainder
of the LED display will turn off. If you would like to adjust the settings whilst in sleep mode, press the
relevant buttons and the display will illuminate for 5 seconds and then return back to sleep mode. Press
Sleep Mode button again to reset the LED control panel back to normal.
Frost Protection:
When operating the unit in temperatures less than 18°C the surface of the evaporator will accumulate
frost and effect the efficiency of the dehumidifier. When this happens the machine will go into periodic
defrost mode automatically and the indicator light will illuminate.
During defrost mode; the dehumidifying function and air purification function may run intermittently –
this is normal. Do not switch off unit when running in defrost mode.
Note: Do not use the dehumidifier in temperatures less than 5°C. Should the dehumidifier freeze-up
switch off the appliance, allow the temperature to rise and then restart.
Auto-Restart:
If the unit stops unexpectedly due to a power cut, it will restart when the power resumes with the
previous function selected automatically.
Full Water Tank:
When the water tank is full, the dehumidifier will automatically stop operating and the full water tank
indicator will illuminate. Remove the water tank carefully with both hands and discard the water. Replace
the water tank in the correct position. The dehumidifier will automatically begin operating again.
Note: If the water tank is not installed correctly, the unit will not operate. Always ensure that water
tank is installed correctly.
Continuous Drainage:
If you would like to use the dehumidifier over a long period of time
whilst away from the home, you can use the continuous drainage
feature.
• Remove the drainage plug located at the back of the unit,
just below the air outlet.
• Connect the drainage hose (supplied) into the dehumidifier.
• Feed other end of the drainage hose into a suitable drainage
point.
Note: When using the continuous drainage feature, the hose must
be placed below the drainage outlet without knots or kinks.
Note: When the continuous drain feature is not being used,
remove the drain hose from the outlet and replace the drainage
plug.
