5
2. Operation Guide
Power on/off
Plug in the unit with a short buzz,
the red power indictor “8” will always light up.
The LCD display will show for 12 seconds then turn off if no buttons are pressed.
Press the power on/off button “1” to turn on the device with a short buzz, the day, time, room
temperature and temperature unit is displayed. One of the power (
“HI” or “”LO”) and the model (“M” or
“A”) will be on.
The temperature is factory set at 24
o
C. This temperature is held in memory in the event of power
interruption.
To turn the heater off press t
he power ON/OFF button “1”
Temperature Setting
(mechanical mode is the same as the automatic mode): temperature unit is
o
C .
When the device is switched on, press the downwards adjustment “5” or upwards adjustment “6” which
will make the temperature dis
play “19” flash.
Press the downwards adjustment “6” or upwards adjustment “5”again to set the desired temperature.
The highest setting temperature is 30
℃
lowest temperature is 5
℃
.
Press the OK button “4” to finish temperature setting.
When the set temperature stops flashing the room temperature will show on the LCD screen.
Time Setting
When using the device for the first time, the time on screen may not be the same as the actual time, so please
set the correct date and time
Day
:
When the power is on, p
ress the SET “3” and OK “4” at the same time for 3 seconds
The day “9” will flash
Then press the downwards adjustment “5” or upwards adjustment “6” to choose the right day.
Press SET “3” to finish.
The day ”9” will stop flashing.
Hour
:
After setting the r
ight day, the hour “17” will flash.
Then press the downwards adjustment “5” or upwards adjustment “6” to set the right hour
Press SET “3” to finish
The hour “17” will stop flashing.
Minute:
After setting the right hour, the minute “18” will flash,
Then pr
ess the downwards adjustment “5” or upwards adjustment “6” to set the right minute
Press SET “3” to finish
The hour “18” will stop flashing
Second
:
After setting the right minute, the second “19” will flash,
Then press the downwards adjustment “5” or upwards adjustment “6” to set the right minute
Press SET “3” to finish
The hour “19” will stop flashing
After setting the right second press SET “3” again to finish time setting. All the symbols will stop
flashing
Automatic “A” mode timer setting (7 days timer)
When in automatic mode, the timer icon
“16” will not display.
Day setting
:
Press M/A “2” choose automatic mode, LCD screen will display “A”,
Press SET “3” and the current day on the screen “9” will flash
Press the downwards adjustment “5” or upwards adjustment “6” to set the day which needs to be set
with the timer
The Hour “17” and Minute “18” will display the timer for last setting.
Press SET “3” to finish day setting,
The Day ”9” will stop flashing.
