9
Safety Control
Your heater is fitted with a safety device “Double Protector” that (1) switches off the heater by thermal
cut-off in the event of overheating or malfunction and it will reset while the temperature reduces to
a normal level. (2) Shuts off the heater by thermal fuse in the event of overheating or malfunction and
prevents operation by some other accidental reason.
If overheating or malfunctions continue, return the heater to an Approved Service Agent for examination.
The most common cause of overheating is deposits of dust or fluff entering the heater, therefore it
is important to ensure that these deposits are removed regularly by unplugging the unit and vacuum
cleaning air vents and front grille.
Power Indicator Light
This fan heater is equipped with a power indicator light that glows whenever the heater is plugged in
and turned on. It will continue to glow even if the thermostat has cycled through the heating elements.
This feature is to prevent you from being unaware that the heater is operating and maintaining the
temperature of the room.
When you do not wish the heater to control the room temperature, turn the control switch to O (off)
and remove the plug from the electrical outlet.
CLEANING & MAINTENANCE
1. Light accumulated dust may be removed from the heater with a soft cloth. Wipe the exterior
surfaces of the heater occasionally with a lightly damp cloth (not dripping wet) with a solution of mild
detergent and water. Dry the case thoroughly with a soft dry cloth before operating the heater.
2. The fan motor is lubricated by the factory and will require no further lubrication
3. No other user maintenance is required or recommended. If service is required, send your heater to
the nearest authorised service depot.
4. Store heater in a clean and dry place when not in use. REMEMBER - portable electric heaters are
designed for spot heating, or as a supplementary heat source. They are not intended to be main
sources of heat during the normal heating season.
Note: There may be trace of smoke or odour when unit is first operated. This is caused by protective
residue left on the heating coil during the manufacturing process. It will quickly evaporate, and should not
re-occur.
Warning: This heater cannot achieve accurate temperature control of the environment, and thus
cannot be used as an insulation device for storage environment, items, animals and plants.
