Using Your Wine Cooler
Manual Temperature Setting
The temperature dial is located on the inside of the Wine Cooler.
The numbers on the dial represent the temperature setting and not the actual temperature in
degrees. Number 1 is the warmest setting and number 7 is the coolest setting. 0 Turns the
cooler off.
Setting 1:
16-18 °C
Setting 2:
14-16 °C
Setting 3:
12-14 °C
Setting 4:
10-12 °C
Setting 5:
8-10 °C
Setting 6:
6-8 °C
Setting 7:
4-6 °C
Changing the Interior Light
(Model IG6103 Only)
Before removing the interior light, turn off the appliance and then unplug from the mains
power outlet. Failure to do so could result in an electrical shock or personal injury.
•
Use a screwdriver to remove the screw.
•
Remove the transparent light cover gently.
•
Pull out the existing light bulb by un-screwing anti-clockwise.
•
Insert the new light bulb (E14, Max 15W)
•
Replace the transparent light cover and tighten screw.
Cleaning Your Wine Cooler
Un-plug the wine cooler from the mains supply.
You should clean the wine cooler internally with warm water using a soft cloth. Wipe the
wine cooler dry before replacing any beverages.
Clean the exterior of the wine cooler using a mild detergent and a soft cloth. Plug in and
switch on the mains supply.
3
Troubleshooting
You can solve many common appliance problems easily. Try the suggestions below to see
if you can solve any problems before calling our Customer Services Department.
PROBLEM
POSSIBLE CAUSE
No power
•
The appliance may not be plugged
in at the mains.
•
The circuit breaker may have
tripped or blown a fuse.
Temperature inside the cooler is too warm
•
The temperature control is set too
warm. Set the dial to a cooler
setting. The temperature may take
a couple of hours to stabilise.
•
The door is not closed properly.
•
The cooler has recently been
disconnected for a period of time
and may take 3-4 hours to cool to
the required setting.
Temperature inside the cooler is too cold
•
The temperature control is set too
cool. Set the dial to a warm setting.
The temperature may take a
couple of hours to stabilise.
Vibrations
•
Check the appliance is on a level
surface.
•
The appliance may be touching a
wall.
Condensation appears on the inside of the
cooler walls
•
The door may be open slightly.
•
The door has been kept open too
long.
Condensation appears on the outside of the
cabinet
•
This maybe due to a change in the
room temperature.
The door will not close properly
•
The appliance may not be on a
level surface.
•
There may be an obstruction in the
door gasket preventing the door
from sealing correctly.
Repairs and maintenance of the appliance should only be performed by an authorised,
qualified technician.
WARNING! It is hazardous for anyone other than authorised personnel to carry out
servicing or repairs which involve the removal of covers. To avoid the risk of an electric
shock do not attempt repairs yourself.
4
