![background image](http://html1.mh-extra.com/html/igenix/ig6050/ig6050_instructions-for-use_3934944003.webp)
PRODUCT GUARANTEE
This product carries a 12 month guarantee. In the
unlikely event you experience any problems with
your Igenix product please call our Customer
Services Department on 01473 271 272.
PRODUCT SPECIFICATION
Model
IG6050
IG6075
IG6103
Climate Class
N
Voltage (V)
220 -240
Frequency (Hz)
50
Refrigerant
R600a / 20g
R600a / 23g
R600a / 25g
Interior Temperature
4 – 18 °C
Net Weight (Kg)
20
24
30
Bottle Capacity
16
25
35
ENVIRONMENT
Do not dispose of electrical appliance as unsorted municipal waste, use separate collection
facilities. Contact your local government for information regarding the collection systems
available. If electrical appliances are disposed of in landfill or dumps, hazardous substances
can leak into the groundwater and get into the food chain, damaging your health and well-
being.
When disposing of any refrigeration items always remove the doors and leave shelves in
place so that children cannot easily climb inside.
5
Installation
Ensure that the wine cooler is placed onto a firm / flat surface and that the room is well
ventilated with an average room temperature of between 16°C and 32°C. This appliance is
not suitable to be used in a garage of any other exterior location.
Avoid locating your wine cooler in moist areas or near a heat source, e.g. cooker, boiler or
radiator. Also avoid direct sunlight.
Leave a gap of at least 1 inch around each side of the Wine Cooler. Ensure that all
ventilation openings are free from any obstructions.
Levelling the Refrigerator
Once the wine cooler is sited in its final location, make sure it is level. To do this use the two
levelling feet at the front of the wine cooler. If the wine cooler is not level, the doors and
magnetic seal alignments will be affected.
Cleaning Before Use
Wipe the inside of the wine cooler with warm water using a soft cloth. Wipe completely dry.
Place the wire shelves inside the wine cooler. Each wire shelf has a tab to engage the
cabinet on both sides. Any of the wire shelves can be removed to accommodate larger
items. To remove a wire shelf left the shelf upwards and then pull out slowly.
Ensure that all wire shelves are firmly in place before storing bottles etc
IMPORTANT
Always allow 2 hours before turning on the wine cooler to allow the coolant fluid time to
settle after the wine cooler is in place.
Switch the wine cooler on at the mains and allow to cool for 3-4 hours before placing any
beverages inside.
Please Note – The wine cooler door is not reversible.
2