![background image](http://html1.mh-extra.com/html/igenix/ig5200/ig5200_user-manual_3959968008.webp)
8
CLEANING & MAINTENANCE
Always unplug teh heater from the wall and allow it to be cool. Clean the outside by wiping with a damp
cloth (not wet). Do not use detergents or abrasive materials. Do not allow for any water to enter the
heater. You can use a vacuum cleaner to remove dust from the inlet and outlet grille.
Storing the Heater
When the heater is not used for long periods of time, it should be protected from dust and stored in a
clean dry place. The original packaging box can be saved and used to store the heater away.
Problem
Possible Cause
Solution
The heater
1. Not properly plugged into the
1. Plug in firmly.
does not work.
mains wall socket.
2. Make sure appliance is switched on.
2. Not switched on
3. Check fuse or breaker.
3. No electricity in the mains wall socket.
The heater is
1. Inadequate air flow
1. Make sure there is circulating air in
getting too hot
2. Heat setting too high
the room
3. Vents are blocked
2. Adjust heat settings accordingly
3. Make sure all vents are clear and free
from obstruction.
TROUBLESHOOTING GUIDE
Please refer to the trouble shooting guide when experiencing an issue with your heater. If you still cannot
determine the fault then please call our Customer Services number 01473 271272