background image

 

SAFETY INSTRUCTIONS 

Important:  This appliance is not intended for use by persons including children with reduced physical, sensory 
or  mental  capabilities,  or  lack  of  experience  and  knowledge,  unless  they  have  been  given  supervision  or 
instruction concerning use of the appliances by a person responsible for their safety. 
 
1.  Read these instructions before use and keep in a safe place. 
2.  Ensure that the electricity supply in your home is rated at 220 - 240 volts before operating the urn. 
3.  Children should be supervised to ensure that they do not play with the urn. 
4.  This urn is designed for indoor use only and must not be used or stored outside. 
5.  Always unplug the appliance before attempting to move it. NEVER move the urn with hot water inside. 
6.  Repairs to electrical appliances are only to be undertaken by trained personnel. Repairs by untrained 

professionals can be dangerous. 

7.  To protect against fire, electric shock and injury to persons do not immerse the cord, plug or urn in water or 

any other liquid. 

8.  Unplug from the power socket when not in use and before cleaning. Allow to cool before putting on or taking 

off parts, and before cleaning the appliance. 

9.  Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or has been 

damaged in any manner. This appliance must be earthed. 

10.  The use of accessories not recommended by the manufacturer may result in fire, electric shock or injury. 
11.  Do not let the cord hang over the edge of the table or counter, or touch a hot surface. 
12.  Do not place on or near a hot gas or electric burner, or in a heated oven. 
13.  Operate on a firm, flat surface out of reach of children. 
14.  Do not operate on a metal surface. 
15.  Do not use the urn for anything other than its intended use. 
16.  To  disconnect  from  the  power  supply,  ensure  that  switch  is  in  the  “Off”  position  and  remove  plug  from  the 

power socket. Always hold the plug, never pull the cord. 

17.  The metal body of the urn will become hot when operated, so do not touch with bare hands. Use the tap and 

handles only. 

18.  Do not let the urn operate without water. 
19.  Avoid contact with steam when removing the lid from the urn after boiling. 
20.  Take care when dispensing the hot water from the tap. 
21.  Do not fill the urn past the MAX level, boiling water may spill out. 
22.  Ensure the lid is firmly closed and do not open the lid whilst boiling. 
23.  Never modify the urn in anyway. Unauthorised modifications will render your warranty invalid. 
24.  Do not switch on the urn if it is upside down or on its side. 
25.  Do not leave the urn unattended when in use. 
26.  Do not leave water in the urn for more than 2 days without boiling as it could stagnate. Empty the water out 

completely and refill if the urn has been stood idle over the weekend. 

 
 

 

 

Catering Urns at a Glance 

 

Summary of Contents for IG4008






Reviews: