3
Operation
DF2900 Manual Control Panel
DF2950 Remote Control Panel
1. To control the speed of the fan press buttons 1,
2 or 3 on the base of the fan.
•
1 = Low Speed
•
2 = Medium Speed
•
3 = High Speed
•
0 = OFF
1. Push the Oscillation button to turn on the
Oscillating function. Push again to turn the
Oscillation function off.
2. To set the Timer, turn the timer control dial
clockwise to the required time.
3. To begin fan operation press Fan Speed button (B) once. This will start the fan on speed level one as indicated
by the illumination on the 1
st
LED. This button will also increase the fan speed.
•
Once = Low Speed
•
Twice = Medium Speed
•
3 Times = High Speed
Fan speed can be decreased by pressing the Fan Speed button again.
4. Push the Oscillation button (D) to turn on the Oscillating function. Push again to turn the Oscillation function off.
5. The Timer is programmable from 30 min to 7.5 hours. You can set the Timer in 30 min increments by pressing
the Timer button (C).
E.g. when setting for 3.5 hours. Press the Timer button 7 times. Indicator lights 0.5h, 1h and 2h will all be
illuminated.
6. The standard fan mode can be changed to Natural Breeze or Sleeping Mode. Press fan mode button (E):
•
Once = Natural Breeze
•
Twice = Sleeping Mode
•
3 Times = To switch back to the standard fan mode
Warning
•
The fan must be placed on a flat even surface.
•
When you turn off the fan, press the OF button (A) on the base. Switch off at the mains and removed the
plug.
•
Ensure that the fan will not be obstructed when oscillating.
A . OFF Button
B. Fan Speed
C. Timer
D. Oscillation
E. Fan Mode
