2
SAFETY INSTRUCTIONS
Important: This appliance is not intended for use by persons including children with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliances by a person responsible for their safety.
WARNING: To reduce the risk of burns, electric shock, fire, injury to persons or exposure to excessive
microwave energy:
1.
Read all instructions before using the appliance.
2.
This appliance is for domestic use only. This appliance is for indoor use only. Do not use outdoors.
3.
Make sure the voltage in your home corresponds to the one shown on the rating label of the appliance.
4.
Do not operate this appliance if it has a damaged cord or plug, if it is not working properly or if it has
been damaged or dropped. If the supply cord is damaged, it must be replaced by the manufacturer or its
service agent or a similarly qualified person in order to avoid a hazard.
5.
WARNING: Children should be supervised to ensure that they do not play with the appliance.
6.
Place fan on a flat even surface.
7.
Do not use an extension lead with this desk fan.
8.
Do no insert fingers or objects through grille.
9.
Do not use in damp areas such as bathrooms.
10. Do not use by a window.
11. Do not use with semi-conductors speed control.
12. This fan should not be operated without the base fitted or laying down.
13. Do not cover the power cord. Ensure the position of the cord does not pose a hazard.
14. Unplug the fan when not in use.
15. Do not operate in areas where flammable liquids such as paint and petrol are used.
16. This fan must not be earthed.
Tower Fan At a Glance
Assembly
1. Remove the 2 screws from the bottom of the motor casing. Leave to one side.
2. Slot the front and rear base plates together ensuring that the power lead is passed through the centre.
3. Replace the 2 screws through and bottom of the base plate and into the base of the fan and tighten.
4. Push the power lead into the cable grip at the bottom of the base plate.
5. Stand the fan up on the base and ensure it is balanced and secure.
1. Front casing
2. Base
3. Top cover
4. Control panel
5. Blade wheel
6. Rear base plate
7. Front base plate
8. Rear casing
9. Motor
