8
OPERATING INSTRUCTIONS
1. Ensure the control knob is in the off position (0) and then plug in.
2. Adjust the fan speed by twisting the control knob
0 = Off
I = Low
II = Medium
III = High
3. To oscillate fan, push the oscillate knob down, which is located at the top of
the fan head (motor). To stop oscillation, pull up the same knob.
4. To change the angle of the fan, loosen large tilt control knob and the smaller
locking screw, adjust fan head to the desired position and re-tighten.
5. Use the height adjustment lock to raise or lower the fan. Ensure the lock is
fully tightened.
CLEANING AND MAINTENANCE
1. Switch off and remove plug from the socket.
2. Remove the front guard.
3. Wipe blades with a soft damp cloth, taking care not to alter the angle of the
blades. Allow to dry or wipe with a soft dry cloth.
4. Replace the front guard.
5. If necessary, you can use a soft brush or vacuum cleaner to remove dust
from the guards.
6. Ensure that the fan has been reassembled fully before use.
MAINS PLUG FUSE REPLACEMENT
Fuse Cover
Fuse Replacement (Class I)
This appliance must be eathed. Remove the fuse cover with
a small flat head screw driver. Take out the fuse and replace
with a new fuse of the same Amp. Replace the fuse cover
and push back into place.
