17
5.2.2 Power connection
The device terminal strip is live during operation!!
Before working on the device disconnect it from the mains!!
If inductive equipment is connected, voltage peaks occur when switching
off. For this reason, connected inductive equipment (e.g. contactor) must
be provided additionally with an RC circuit: e.g. 0.1µF / 100 .
The output contacts are only switched when both electronic circuits
energise the corresponding relays (Chap. 4.3)
For free assignment are solely the outputs 5-7 and 2 potentially free
outputs. All of these 5 SPDT outputs are located on the terminal strip X3.
Assignment plan:
Danger
Danger
Caution
Summary of Contents for EWLS
