• 7 •
ANCHORAGE FITTING INSTALLATION
If the car is fitted with a child restraint anchorage point.
Locate the anchorage points behind the rear seating
position (consult the car owner’s handbook for the
location of the anchorage point). Remove the thread
plug from the parcel shelf / floor/ roof and install the
attachment bolt as shown in Fig 1.
If the car is not fitted with a child restraint anchorage
point.
For sedans only
– Drill a 9mm diameter hole in the
parcel shelf on the centre – line of the seating position
as shown in Fig 2. Install the anchor bolt as shown in
Fig 3.
For vehicles other than sedans – In Australia, consult
your nearest child restraint fitting station or traffic
authority for vehicle inspection to find the best, correct
position for the placement of anchorage point, and for
the correct attachment bolt length and use of spacers.
In New Zealand, consult the agent for the vehicle.
CAUTION: DO NOT OVERTIGHTEN THE
ATTACHMENT BOLT. MAXIMUM TORQUE 20 Newton
Metre.
Attachment bolt
Lock Washer
A nchor Fitting
Spacers (if required)
Vehicle Trim
Vehicle Metal Structure
Fig 1
Front of vehicle
WARNING
