• 33 •
WARNING
Easy use tip for base engagement
• Ensure the child restraint harnesses are tight and not
dangling down below the child restraint rods located
on the bottom of the child restraint.
• Check the location of the tether stap to ensure it is not
obstructing the attachment of the base.
• Ensure the child restraint harness is threaded correctly
and is not threaded over the child restraint rods located
on the bottom of the child restraint preventing the child
restraint from attaching to the base.
• Ensure the child restraint handle is in the upright position.
• When attaching the base, tilt the child restraint slightly
up so that the foot of the child restraint will connect to
the base first. Slowly slide the foot of the child restraint
downward. The weight of the child restraint will
naturally push the head of the child restraint
downward and hear a loud, audible
‘CLICK’
when the
child restraint and base engages.
• Pull on the handle of the child restraint to ensure it is
fully connected and push on the release handle at the
same time.
• To remove the child restraint from the base, pull out
the release handle on the base and at the same time
lift the child restraint handle until it has released from
the base.
