5
4. ELECTRIC BLOCK DIAGRAM
5. OPERATION CONTROL AND DESCRIPTION
●
Front control panel
(see Figure 1)
(1) "
+" output terminal:
To connect the electrode holder.
(2)
"-" output terminal:
To connect the work clamp.
(3)
Welding current knob:
To adjust the output current.
(4)
Power LED:
To indicate the power. Power LED on indicates that the power switch of the
machine is on.
(5)
Overheating LED:
To indicate overheating. Overheating LED on indicates that the
temperature inside the machine is too high and the machine is under overheating protection
status.
(6)
MMA/TIG switch:
To toggle between MMA and TIG.
●
Back control panel
(see Figure 2)
(7)
Power input:
Power input cable.
(8)
Power switch:
Power ON/OFF switch.
(9)
Fan
