85
iG5 User Manual
Antenna Height
This height is included in collected files, however the
iGx_Download tool allows/forces you to overwrite this value
when submitting OPUS files or exporting data. The default
value is
0.0000
meters.
Measure Way
This setting indicates how the
Antenna Height
should be
applied to collected files. This setting is overwritten in files
exported by the iGx_Download tool so typically its setting
does not matter.
Don’t use
Slant Height
as the SHMP of the internal
measurement is undefined.
Don’t use
Vertical Height
as the L1 Phase Center height
assumed by the receiver may not match the NGS calibration.
Storage Format
Storage Format
controls the non-RINEX file type which is
stored on the receiver. The default is
HCN
. If you plan to use
the iGx_Download tool, the format MUST BE HCN.
OFF
disables native file format storage.
HRC
is a compressed
HCN
file, however is it not compatible
with iGage supplied tools.
The advantage of storing
HCN
files is you can later decide to
output RINEX2 or RINX3 files and you can later control
included tracking. If you rely on RINEX output, you are
constrained to the initial selection.
