Page
4
of
6
Pairing with a Bluetooth transmitter
You can connect the receiver with a suitable Bluetooth transmitter to enjoy music wirelessly.
The operation of transmitters varies by brand; the steps below are general pairing
procedures:
Step-1
Place the receiver and Bluetooth transmitter device close together, ideally no more
than 1 metre apart.
Step-2
Put the receiver into pairing mode (see ‘How to enter pairing mode on the receiver’).
Step-3
Follow the operating instruction of your Bluetooth transmitter to start the pairing
process. Once in pairing mode it will search for Bluetooth devices automatically and send a
pairing request.
Step-4
When the receiver requests a PIN number, the transmitter should automatically
respond with ‘0000’ automatically.
If the connection is successful, the Blue LED will quickly flash twice every 4 seconds. If the
pairing is unsuccessful, please turn off both the receiver and transmitter. Then, return to
Step-1 and do the pairing procedure again. You may need to consult the Bluetooth
transmitter operating instructions for pairing with a Bluetooth receiver.
Notes:
The pairing password of the receiver is ‘0000’. The receiver can only pair with a
transmitter whose pairing password is also ‘0000’.
If pairing continues to fail, please consult the transmitter’s operating instructions for
guidance.
3.
Reconnecting with a Bluetooth device
Automatic connecting
Each time the transmitter is turned on it will automatically connect to the last connected
device. If you wish to pair it with other devices please turn off the Bluetooth function of the
last connected device and pair the receiver with the new device using the ‘Pairing with a
Bluetooth receiving device’ procedure.
Manual connecting
When the transmitter is in standby mode, press the MFB button once. It will then connect to
the last connected device.
4.
Power saving mode
BTR006L will automatically switch off if no devices can be connected within 5 minutes.
5.
Audio playback
Once BTR006L is connected both to a speaker and a Bluetooth enabled device at the same
time you can enjoy music wirelessly.
Function
Status of BTR006L
Operation
Pause
Playing music
Short press MFB button once
Play
Pausing
Short press MFB button once
Notes:
The audio will automatically pause when you make or receive a call on a Bluetooth
enabled mobile phone
BTR006L has no microphone so calls need to be switched to the mobile phone. Audio will
automatically start again when the call is ended.
