Rev. 1.0
Page 16
START
STOP
Find Transmit Frequency
Setup:
1. This COM-120B has been pre-configured for common transmitter test
setups.
2. Press the
key to access the COM-120B System Setup
Utility software.
3. The menu to the right will appear.
4. Select
STEP 1
by positioning the
cursor and pressing
F1
Execute
.
5. The COM-120B will now configure itself to find a transmitter
frequency. The receive screen is selected and the COM-120B is
monitoring the Power meter for the presence of RF Power.
6. Key the Transmitter and the COM-120B will switch screens to the
stand alone spectrum analyzer to find the transmitter signal. Once
the signal is found, the COM-120B will return to the Receive screen
to allow evaluation of the transmitter. Keep the transmitter keyed
until the COM-120B has completed this task. This procedure can be
repeated if desired for a different radio channel.
7. This transmitter has been configured for a
transmit frequency of 151.6250 MHz on
channel
2
. This should be the frequency
that the COM-120B found.
Summary of Contents for COM-120B
Page 1: ...Rev 1 0 Page 1...
Page 2: ...Rev 1 0 Page 2...
