ZZ0814 ZZ0815 ZZ0816 ZZ0817
24
[Directory of Result File]
Sets the directory to the result file. The ERP system sends its feedback back to the controller via a
results file. The controller evaluates the loading and unloading of the goods via the result file. A new
result file is generated after each loading and unloading of the goods.
[Result File ]
The [Activate] buttons and [Deactivate] activate or deactivate the creation of the result file.
[Finish]
The [Finish] button ends the system settings. The gates configuration will then be started. (
[Back]
The [Back] button switches back to the language selection.
8.4.1 Gate configuration
The gate configuration sets the master gate and up to 9 extension gates.
Fig. 11: Gate configuration of the Gates software
[Gate ID]
Sets the ID of the Gate. In the best case, the ID is a unique number with which the goods are
assigned to the gate. Example:
490103
49 for Germany, 01 for plant 1, 03 for gate number 3
[UHF Unit Type]
Sets the type of the connected evaluation unit. Possible settings:
•
[DTE830] (for Europe)
•
[DTE930] (for USA, Malaysia, Singapore)
[Reading Time (Bulk)]
Sets the active reading time after detecting a person or forklift. Possible settings:
•
[0,5 s]
•
[1 s]
•
[2 s]
•
[5 s]
[Direction Recognition]
Sets the detection of the loading direction. Possible settings:
