21
UK
Explanation min/max memory (MEM)
HI�F
Max� value flow
LO�F
Min� value flow
HI�T
Max� value temperature
LO�T
Min� value temperature
Explanation empty pipe (EPD)
EP�On
Empty pipe detection on / off
dEP�E�
Delay time empty signal
dEP�F
Delay time full signal
EP�Pr
Current measured value of empty pipe detection
EP�SP
Switch point of empty pipe detection
Explanation simulation (SIM)
S�FLW
Simulation flow value
S�TMP
Simulation temperature value
S�Tim
Simulation time
S�On
Simulation start
9 Set-up
After power on and expiry of the power-on delay time (approx� 5 seconds) the unit
is in the normal operating mode� It carries out its measurement and evaluation
functions and generates output signals according to the set parameters�
For the analogue output 2 (OUT2), the output signal is 20 mA during the power-on
delay time�
In the first 2 seconds, analogue output 1 (OUT1) is passive and available for IO-
Link communication� During the remaining power-on delay time, the output signal
is at 20 mA�
