![background image](http://html1.mh-extra.com/html/ifm/sd6020/sd6020_operating-instructions-manual_3954159039.webp)
39
UK
10.5 User settings (optional)
10.5.1 Standard display
►
Select [diS�L] and set process value display:
-L1
= current process value for volumetric flow
-L2�Temp = current process value for flow and temperature
-L2�Totl
= current process value for volumetric flow and totaliser
-L3
= current process value for volumetric flow and
temperature and current totaliser value
►
Select [diS�U] and set refresh rate of the display:
-d1 = high
-d2 = medium
-d3 = low
►
Select [diS�R] and set the orientation of the display:
0°, 90°, 180°, 270°
►
Select [diS�B] and set the brightness of the display:
25 %, 50 %, 75 %, 100 %
or OFF (= energy-saving mode� The display is switched off in the
operating mode� Error messages are displayed even if the display is
deactivated� Display activation by pressing any key�)
Menu DIS:
[diS�L]
[diS�U]
[diS�R]
[diS�B]
10.5.2 Standard unit of measurement for volumetric flow
►
Select [uni�F] and set unit of measurement for standard display
(→ 8.1)
:
l/min, m
3
/h, m/s, ft
3
/min, ft
3
/h, ft/s�
Set [uni�F] prior to configurating the outputs�
The consumed quantity (meter reading) is automatically displayed
in the unit of measurement providing the highest accuracy�
Menu CFG:
[uni�F]
10.5.3 Standard unit of measurement for temperature
►
Select [uni�T] and set unit of measurement for standard display
(→ 8.1)
:
°C or °F�
Set [uni�T] prior to configurating the outputs�
Menu CFG:
[uni�T]
10.5.4 Measured value damping
► Select [dAP.F] and set damping constant in seconds (τ value 63 %).
Menu CFG:
[dAP�F]