![background image](http://html1.mh-extra.com/html/ifm/sd26-series/sd26-series_operating-instructions-manual_3967422034.webp)
34
Explanation submenu COLR
The displayed parameters change when the factory setting in submenu
OUT1 and OUT2 is changed�
Parameter
Explanation and setting options
coL�F
colour of the characters in the display for the flow rate value
cFH�F
upper limit of the colour change for flow rate measurement
cFL�F
lower limit of the colour change for flow rate measurement
coL�T
colour of the characters in the display for the temperature value
cFH�T
upper limit of the colour change for temperature measurement
cFL�T
lower limit of the colour change for temperature measurement
coL�P
colour of the characters in the display for the pressure value
cFH�P
upper limit of the colour change for pressure measurement
cFL�P
lower limit of the colour change for pressure measurement
coL�V
colour of the characters in the display for the totaliser value
bk/wh permanently black/white
yellow permanently yellow
green permanently green
red permanently red
r-cF display colour between limits cFL���cFH red, outside green�
G-cF display colour between limits cFL���cFH green, outside red�
Explanation submenu SIM
Parameter
Explanation and setting options
S�FLW
simulated flow coefficient
S�TMP
simulated temperature value
S�PRS
simulated pressure value
cr�UL measured value below the detection zone
→
error message
UL measured value below the display range
→
warning
OL measured value above the display range
→
warning
cr�OL measured value above the detection zone
→
error message
S�Tim
simulation time in minutes
S�On
simulation status: OFF, On