18
10 Parameter setting
CAUTION
For medium temperatures above 50 °C (122 °F) some parts of the housing can
heat up to over 65 °C (149 °F).
> Risk of burns�
►
Do not touch the device with your hands�
►
Use another object (e�g� a ballpoint pen) to carry out settings on the unit�
Parameters can be set before installation or during operation�
If you change parameters during operation, this will influence the function�
►
Ensure that there will be no malfunctions in your plant�
During parameter setting the unit remains in the operating mode� It continues to
monitor with the existing parameter until the parameter setting has been complet-
ed�
The parameters can also be set via the IO-Link interface
�
10.1 Parameter setting in general
1� Change from the RUN mode to the main menu
[
●
]
2� Select the requested parameter
[
▲
] or [
▼
]
3� Change to the setting mode
[
●
]
4� Change the parameter value
[
▲
] or [
▼
] > 1 s
5� Acknowledge the set parameter value
[
●
]
6� Return to the RUN mode
> 30 seconds (timeout) or
press [
▲
] + [
▼
] simultaneously
until the RUN mode is reached�
By pressing [▲] + [▼] simultaneously you exit the setting mode without
saving the changed parameter�
