background image

19

UK

9.2  Define the operating mode (optional))

 

Select [CMPT] and set the operating mode

 -[1] = operating mode 1 

 -[2] = operating mode 2

 -[3] = operating mode 3

Description of the operating modes see 

(→ 4.1)

When using IO-Link, an IODD suitable for the operating mode must 

be used�
When the operating mode is changed, all parameters are reset to 

factory setting�

9.3  Configure display (optional)

 

Select [uni] and set the unit of measurement:

 -[bAr], [mbAr], 

 -[MPA], [kPA],

 -[PSI],

 -[inHG]

The selectable units of measurement depend on the respective unit� 

See table Setting ranges 

(→ 11.1.1)

 

Select [diS] and set the update rate and orientation of the display:

 -[d1]: update of the measured values every 50 ms�

 -[d2]: update of the measured values every 200 ms�

 -[d3]: update of the measured values every 600 ms�

 -[rd1], [rd2], [rd3]: display as for d1, d2, d3; rotated by 180°�

 -[OFF] = the measured value display is deactivated in the Run mode�  

The LEDs remain active even if the display is deactivated�

Error messages are displayed even if the display is deactivated�

Even with unsteady pressure characteristics [d1] provides optimum 

readability; the corresponding algorithms are stored�

Summary of Contents for PN7160


































Reviews: