16
If [C�Loc] is displayed when you try to change a parameter value, a
parameter setting process is active via the IO-Link communication
(temporary locking)�
If [S�Loc] is displayed, the sensor is permanently locked via software� This
locking can only be removed with a parameter setting software�
• Change from menu level 1 to menu level 2:
► Press [●] to get to the menu.
► Press [▼] until [EF] is displayed.
► Press [●].
> The first parameter of the submenu is
displayed (here: [rES])�
• Locking / unlocking
The unit can be locked electronically to prevent unintentional settings�
►
Make sure that the unit is in the
normal operating mode�
►
Press [
▲
] + [
▼
] simultaneously for
10 s�
> [Loc] is displayed�
10 s
During operation: [Loc] is briefly displayed if you try to change parameter values�