5
UK
5 Electrical connection
The unit must be connected by a suitably qualified electrician�
Voltage supply to EN50178, SELV, PELV�
►
Disconnect power before connecting the unit�
6 Setting / Operation
Pin 4 = OUT1 / Pin 2 = OUT2
1: locking ring
2:
setting rings (manually adjustable after unlocking)
3: yellow LED: Set1 value reached, OUT1 = ON
4: process connection G¼ A; tightening torque 25 Nm
5: setting marks
6: yellow LED: Set2 value reached, OUT2 = ON
7: sealing FPM / DIN 3869-14
8: internal thread M5
• To obtain the setting accuracy: Set the rings to the minimum value, then set the
requested value�
More information at www�ifm�com
