15
UK
6.7 Use of corner mirrors
To protect and monitor hazardous areas with access from several sides one or
several corner mirrors can be used (available as accessory)� By using mirrors the
light beam emitted by the transmitter can be sent via several access sides�
►
To obtain a reflection angle of 90° the mirrors are to be oriented in an angle of
inclination of 45°�
The following image shows an application where U-shaped access protection is
implemented using two mirrors�
Passive (P)
Active (A)
A = hazardous area
M = corner mirror
S = minimum safety distance
Dx = side length
►
Install the corner mirrors so that the minimum safety distance (S) is adhered to
at each side of the hazardous area�
►
During installation make sure that the reflecting area is plane and that no
vibrations affect the safety device�
• The range is the sum of the length of all sides (D1 + D2 + D3) of the access to
the protected area� The maximum range of the photoelectric safety sensors is
reduced by 15% for each mirror�
• Do not use more than two mirrors�
