Photoelectric distance sensor
OMH551 OMH553 OMH555
5
2 Safety instructions
•
The unit described is a subcomponent for integration into a system.
– The system architect is responsible for the safety of the system.
– The system architect undertakes to perform a risk assessment and to create documentation in
accordance with legal and normative requirements to be provided to the operator and user of
the system. This documentation must contain all necessary information and safety instructions
for the operator, the user and, if applicable, for any service personnel authorised by the
architect of the system.
•
Read this document before setting up the product and keep it during the entire service life.
•
The product must be suitable for the corresponding applications and environmental conditions
without any restrictions.
•
Only use the product for its intended purpose (
Ò
→ Intended use).
•
If the operating instructions or the technical data are not adhered to, personal injury and/or damage
to property may occur.
•
The manufacturer assumes no liability or warranty for any consequences caused by tampering with
the product or incorrect use by the operator.
•
Installation, electrical connection, set-up, operation and maintenance of the product must be
carried out by qualified personnel authorised by the machine operator.
•
Protect units and cables against damage.
CAUTION
Exposure to radiation
w
Use of controls or adjustments or procedures other than those specified herein may
result in hazardous radiation exposure.
u
Only use the operating and adjusting devices indicated in the operating instructions.
CAUTION
Visible laser light; LASER CLASS 1.
EN/IEC 60825-1 : 2007 and EN/IEC 60825-1 : 2014 complies with 21 CFR Part 1040 except
for deviations pursuant to Laser Notice No. 50, dated June 2007.
Position of the product label
Warning sign
XX
LASER KLASSE 1
CLASS 1 LASER PRODUCT
APPAREIL Á LASER CLASSE 1
