![background image](http://html1.mh-extra.com/html/ifm/o6p7-series/o6p7-series_operating-instructions-manual_4040501008.webp)
8
7.1.4 Programming unsuccessful
> The LED flashes quickly, 8 Hz�
• Insufficient difference in measurements�
•
Max. programming time (15 min.) exceeded.
7.1.5 Electronic lock
Lock or unlock the buttons
►
Press [OUT ON] and [OUT OFF] simultaneously for 10 s�
> Acknowledgement is indicated by a brief change of the LED switching status�
7.2 Setting via IO-Link
This unit has an IO-Link communication interface which enables direct access to
process and diagnostic data� In addition it is possible to set the parameters of the
unit while it is in operation� Operation of the unit via an IO-Link interface requires
an IO-Link master�
With a PC, suitable IO-Link software and an IO-Link adapter cable communication
is possible when the system is not in operation�
The IODDs necessary for the configuration of the unit, detailed information about
process data structure, diagnostic information, parameter addresses and the
necessary information about the required IO-Link hardware and software can be
found at www�ifm�com�
7.2.1 Adjustable parameters
Among others, the following parameters can be set via IO-Link�
A table of all adjustable parameters can be found at www�ifm�com/de/io-
Parameter
name
Values
Description
Default
SSC1 Param�
SP1
1 ��� 100 Setting switch point in step increment "1"�
After a teach process the resulting value is
displayed�
100
Teach SP1 TP1
1� Part of the teach sequence to set switch
point SP1 by teach on object� Both parts of
the teach sequence for TP1 and TP2 (TP =
teach point) have to be carried out.
N� A�