7
UK
7 Settings
7.1 The sensor is to switch when the object is detected
►
Position the object�
►
Press [+] to increase the range�
> The set distance value is shown flashing in the display�
> The yellow LED lights when the object is detected�
►
Press [-] to decrease the distance value�
> The set distance value is shown flashing in the display�
> During operation, the currently detected distance value is shown in the display�
8 IO-Link
8.1 General information
This unit has an IO-Link communication interface which requires an IO-Link-
capable module (IO-Link master) for operation.
The IO-Link interface enables direct access to the sensor values and parameters
and provides the possibility to set the parameters of the unit during operation�
In addition communication is possible via a point-to-point connection with a USB
adapter cable�
You will find more detailed information about IO-Link at www�ifm�com�
8.2 Device-specific information
You will find the IODDs necessary for the configuration of the IO-Link device and
detailed information about sensor values, diagnostic information and parameters
in the overview table at www�ifm�com�
8.3 Parameter setting tools
You will find all necessary information about the required IO-Link hardware and
software at www�ifm�com�
