IFM O1D100 series Manual Download Page 2

Page: 2 / 4

Setpoint 1

Output 1

Hysteresis mode: normally open

Hysteresis mode: normally closed

Output 2

Hysteresis mode: normally open

Hysteresis mode: normally closed

4 - 20 mA analog output

Analog start point

Analog end point

Setpoint 2

Sampling rate

Repeatability

Program

(Display units) first to avoid

programming errors.

Distance Sensor Menu Items

(continued)

Summary of Contents for O1D100 series

Page 1: ...e set button for 5 seconds until the flashing value is continuously incremented After this time the value may be increased continuously by holding down the set button or incre mented by pressing and r...

Page 2: ...lly closed Output 2 Hysteresis mode normally open Hysteresis mode normally closed 4 20 mA analog output Analog start point Analog end point Setpoint 2 Sampling rate Repeatability Program Display units...

Page 3: ...put Off delay for switching output Display options Display updated every 50 mS Display updated every 200 mS Display updated every 600 mS Same as above with display rotated 180 Display deactivated Indi...

Page 4: ...e values specified for repeatability and accuracy refer to a sampling frequency of 50 Hz At a lower sampling frequency which is adjustable on the unit these values will be lower View the calculation t...