Mode/
Enter
Set
PWR mm
m inch
OUT1 OUT2
Output LED’s
Setting of the parameters
Mode: Selecting the mode
Enter: Acknowledging the setting
4 digit numeric display
Programming Mode
Press until desired menu item is
displayed. (See distance
sensor menu items)
Press to display the current setting.
To change the setting, press and hold the set button
for 5 seconds until the flashing value is continuously
incremented. After this time, the value may be increased
continuously (by holding down the set button) or incre-
mented (by pressing and releasing the button repeatedly)
until the desired value is reached.
Press once to enter desired value.
The desired value is set. If no button is pressed for 15
seconds, the sensor returns to the operating mode.
Repeat these steps to set other values as required.
1
2
3
4
5
6
Display
O1D100 Series
Distance Sensor
Display Unit LED’s
