35
UK
[UL]
Warning: temperature below approx. -30 °C / -25 °F.
[OL]
Warning: temperature exceeding approx. +100 °C / +215 °F.
[----]
Level below the active zone.
[FULL] + [numerical value]
alternately
The overflow prevention OP is reached (overflow warning) or
the level is above the active zone.
It is necessary to adjust [cOP] of the overflow prevention OP.
[Loc]
Unit locked via operating keys; parameter setting impossible.
For unlocking press the two setting buttons for 10 s.
[uLoc]
Unit is unlocked / parameter setting is possible again.
[C.Loc]
The unit is temporarily locked. Parameter setting via IO-Link is
active (temporary locking).
[S.Loc]
Unit is permanently locked via software. This locking can only
be removed with a parameter setting software.
12.2 Read the set parameters
►
Briefly press [Mode/Enter] (if required, repeat several times).
> Menu items are passed through until the requested parameter has been
reached.
►
Briefly press [Set].
> Respective parameter value is displayed for 30 s.
12.3 Read / reset extreme value memory temperature
►
Select parameter [Lo.T] or [Hi.T]
►
Briefly press [Set] for reading.
> Device displays the stored maximum or minimum value for 30 s.
►
To delete the memory keep [Set] pressed until [----] is displayed.
►
Briefly press [Mode/Enter].
12.4 Fast selection level / temperature
In the operating mode:
►
Briefly press [Set].
> Display of the other process value for 30 s; the respective LED is lit.