LMT0xA
Binary level sensor
18
9 Maintenance, repair and disposal
u
Check sensor tip at regular intervals for deposits and damage. Clean the unit if badly soiled. In
case of damage replace the unit.
u
After removal and before reinstallation of the unit carefully clean the probe neck and the installation
slot – especially the sealing cone – with appropriate methods to ensure that the unit is resistant to
ingress and without dead space.
u
It is not possible to repair the unit.
u
In case of return shipment, ensure that the unit is free from soiling, especially from dangerous and
toxic substances.
u
For transport only use appropriate packaging to avoid damage of the unit.
u
After use dispose of the device in an environmentally friendly way in accordance with the
applicable national regulations.
If the variable clamp fitting is used:
u
Check the correct position of the safety chain or the securing wire between the clamp fitting
and the sensor at regular intervals.
u
Replace damaged parts.
