manualshive.com logo in svg

IFM efector100 G1503S, Operating Instructions Manual, Page: 11 / 47

Share
Download
IFM efector100 G1503S Operating Instructions Manual Download Page 11

11

UK

7.2  Feedback contacts / monitored or automatic start

Automatic start

   

Automatic activation without monitoring�

Monitoring of the feedback contacts (normally closed) for automatic start

Release is made when the feedback contacts are 

closed�

Consider the current flowing through the feedback 

contacts (→ 10 Technical data).

1: Feedback contact

Monitored start

Release of the solid state outputs:

 

►

Press and release the start button (> 50 ms)�

This function is not active when used as two-hand 

control�

2: Start button

Monitoring of the feedback contacts (normally closed) for monitored start

Release of the solid state outputs:

The feedback contacts are closed

 

►

Press and release the start button (> 50 ms)�

This function is not active when used as two-hand 

control�

Consider the current flowing through the feedback 

contacts (→ 10 Technical data).

1:  Feedback contact

2:  Start button

Summary of Contents for efector100 G1503S
















































Reviews:

No comments