![background image](http://html1.mh-extra.com/html/ifm/efector-300-si0509/efector-300-si0509_operating-instructions-manual_3898833022.webp)
The flow monitor
• detects the
flow velocity
in liquids
• switches the
output
according to the programming
(N.O./
or N.C./
, programmmable by wiring;
→
page 26)
• and indicates the relative flow value within the adjustable detection
range by means of
LEDs
:
- LED 0 = lower limit of the detection range (maximum value /
LO
)
- LED 9 = upper limit of the detection range (minimum value /
HI
)
• It is also possible to indicate:
- Switching status (LED red: flow below the switch point,
LED orange: flow has reached the switch point).
- Excess flow: LED 9 flashes if the flow is considerably higher
(2 LEDs) than the display range.
- Underflow / flow standstill: LED 0 flashes if the flow is lower than
the display range.
ENGLISH
23
Contents
Function and features . . . . . . . . . . . . . . . . . . . . . . . . . . . page 23
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 24
Electrical connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 26
Programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 27
Installation and set-up / Operation / Maintenance . . . . . . . page 29
Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 29
Programming diagrams / Technical information . . . . . . . . . page 30
Function and features