CR1102
12
Fig. 5: RAM
®
mount components
1: mounting arm with fastening screw
2: mounting plate with ball head
Fig. 6: Dialogue module with mounted RAM
®
mount system
You will find more information about the available RAM
®
mount components at:
4.4.1 Mounting steps
u
Screw the mounting plate to the back of the device.
Usable M5 thread depth: ≤ 8 mm
tightening torque M5: 5
±0.5
Nm
u
Screw second mounting plate / ball head of the selected RAM
®
mount component on suitable
surface according to RAM
®
mount indications.
38 (1,5")
56
62
6
Fig. 7: Mounting plate with ball head
38,1
30
5,3
Fig. 8: Hole dimensions
Tightening torque: 5
±0.5
Nm
u
Slightly loosen the fastening screw of the mounting arm.
u
Place the mounting arm onto the ball heads and tighten the fastening screw.
4.5 Other installation types
Permissible installation types:
Panel mounting / control cabinet installation (
Surface mounting with RAM® mount system (
All other installation types are in the sole responsibility of the system creator.
