CR1077
5
3 Intended use
The ecomatDisplay process and dialogue module is a programmable graphic display for controlling,
parameter-setting and operation of mobile machines and plants. It is suited for use at an operating
altitude of 3000 m above sea level even under severe conditions, such as an extended temperature
range and mechanical stress (Technical data:
and indicated standards).
Permitted use:
•
in mobile machines with supply from on-board systems (with battery) of 12 V DC or 24 V DC
nominal voltage
•
in an industrial environment as a permanently installed unit with supply from SELV/PELV according
to the technical data
•
even in wet environments
•
even outdoors, if necessary with additional UV protection
Communication with other system components, such as decentralised I/O modules, takes place via
CAN, Ethernet and USB interfaces. Together with the Linux operating system they form a universal
platform for networking and communication with other CAN devices, networks or PCs.
By default, the device is not intended for direct connection to IT structures. If this application is
required, the users have to implement it (e.g. by using their own additional components).
This is a class A product. This product may cause radio interference in domestic areas.
u
If required, take appropriate EMC screening measures.
The unit is not approved for safety-related tasks in the field of operator protection.
3.1 Application example
Fig. 1: Networking of 4 analogue cameras with an ecomatDisplay
1:
ecomatDisplay CR1077
2:
analogue cameras (e.g. 4 x O2M200)
3.2 Properties
•
7" colour display
•
Closed metal housing suitable for panel mounting and surface mounting outside or in the cabin
•
Freely programmable to IEC 61131-3 with target visualisation
•
64-bit controller and Embedded Linux operating system
•
CAN interfaces with CANopen and SAE J1939 protocol
•
Ethernet and USB interfaces
