CR1077
12
2
3
4
5
6
7
1
Fig. 6: Mounting principle
1:
M5 hexagon nuts
2:
fixing profile
3:
panel cut-out
4:
spacer
5:
damping strips
6:
set screws
7:
dialogue module
A
Fig. 7: EC730_2D installation kit_dimensioning
Installation depth A = device depth (approx. 53 mm)
Installation depth with the attached connector: ap-
prox. 77 mm
4.4 Surface mounting with RAM® mount system
Using the RAM
®
mount components, available as accessories, the dialogue unit can be used as a
firmly mounted desktop unit. Two ball heads allow variable orientation of the unit.
Fig. 8: RAM
®
mount components
1: mounting arm with fastening screw
2: mounting plate with ball head
Fig. 9: Dialogue module with mounted RAM
®
mount system
You will find more information about the available RAM
®
mount components at:
4.4.1 Mounting steps
u
Screw the mounting plate to the back of the device.
Usable M5 thread depth: ≤ 8 mm
tightening torque M5: 5
±0.5
Nm
u
Screw second mounting plate / ball head of the selected RAM
®
mount component on suitable
surface according to RAM
®
mount indications.