![background image](http://html1.mh-extra.com/html/ifm/ecomatcontroller-cr0708/ecomatcontroller-cr0708_operating-instructions-manual_3951778018.webp)
CR0708 CR0709
18
6.11 Digital / PWM outputs, H-bridge
controller
VBB
30
nn
VBB
15
nn
VBB
0
nn
VBB
1
nn
VBB
2
nn
GND
SYS
nn
GND
1...2
nn
load
nn
nn
PWM
L
, B
L
nn
PWM
H
, B
H
PWM
L
, B
L
nn
PWM
H
, B
H
load
nn
PWM
L
, B
L
nn
PWM
H
, B
H
load
load
Group
n
Group
n
Group
n
Shield
supply
Fig. 10: Connection of the low-side digital outputs (PWML, BL), example CR0709
The controller can be connected to the following loads:
•
resistive loads
•
capacitive loads (adapt diagnostic settings to the load, see programming manual)
•
inductive loads
The connected load must not exceed the maximum permissible values of the respective output (
Ò
Technical data).
u
Supply low-side outputs (B
L
) via a high-side output (B
H
) of the same output group.
Deviating connections are not permitted.
6.12 Mixed operation (12 V / 24 V)
Mixed operation is not permissible when supplied by PELV.
Mixed operation only permissible when supplied by on-board system.