![background image](http://html1.mh-extra.com/html/ifm/ecomat100-o2m102/ecomat100-o2m102_device-manual_4482774014.webp)
PDM360 online help:
The online description of the functions, operation and device-specific libraries of
the PDM360 family is part of the CoDeSys online help.
It is also available for download on the internet.
➔
Data sheet direct
➔
e.g. O2M102
➔
Download/Software
6.1.2 IP address allocation cameras
When using several cameras, set the IP addresses of the cameras via the “Hyper-
text Transfer Protocol” (HTTP). To do so, use standard programs such as Microsoft
Internet Explorer, Mozilla Firefox or Opera.
Procedure:
1. Check the IP settings of the PC/notebook and change them if necessary.
(Start
→
Control Panel
→
Network Connections
→
Local Area Connection)
Internet protocol:
TCP/IP
IP address:
192.168.82.xx (except 15)
Subnet mask:
255.255.255.0
Connection:
10 MBits, half-duplex
Gateway IP address: 192.168.82.15
2. Establish an Ethernet connection between the camera and the PC/notebook.
3. Connect the camera to supply voltage.
Do not interrupt the supply voltage during IP address allocation!
Avoid voltage fluctuations during IP address allocation!
4. Open the internet browser.
5. Enter the preset IP address of the camera in the address line of the browser
and confirm with “Enter” (http://192.168.82.15/).
The start window “O2M1xxx WebConfig” appears in the browser.
www.ifm.com
ETHERNET CAMERA
O2M1
XX
14
patch cable (1:1)
PDM360
Ethernet Cameras
patch cables (1:1)
Hub / Switch
Example 2: IP address allocation when using 4 cameras
192.168.82.247
factory setting
192.168.82.15
192.168.82.16
192.168.82.17
192.168.82.18